WAGO 750-890 Controller Modbus TCP; 4th generation; 2 x ETHERNET, SD Card Slot. A data memory of 8 MB is available. The Modbus TCP Controller can be used as a programmable controller within ETHERNET networks in conjunction with the WAGO I/O System. The controller supports all digital, analog and specialty modules found within the 750/753 Series, and is suitable for data rates of 10/100 Mbit/s. Two ETHERNET interfaces and an integrated switch allow the fieldbus to be wired in a line topology, eliminating the need for additional network devices, such as switches or hubs. Both interfaces support autonegotiation and Auto-MDI(X). The DIP switch configures the last byte of the IP address and may be used for IP address assignment.
This controller supports Modbus TCP for use in industrial environments. It also supports a wide variety of standard ETHERNET protocols for easy integration into IT environments (e.g., HTTP(S), BootP, DHCP, DNS, SNTP, SNMP, (S)FTP).
An integrated Webserver provides user configuration options, while displaying the controller’s status information.
The IEC 61131-3 programmable controller is multitasking-capable and features a capacitor-backed RTC.
WAGO 750-890 Controller Modbus TCP
Communication: Modbus (TCP, UDP)
Width: 61.5 mm / 2.421 inches
Height: 100 mm / 3.937 inches
Depth: 71.9 mm / 2.831 inches
Depth from upper-edge of DIN-rail: 64.7 mm / 2.547 inches