WAGO 750-333 Fieldbus Coupler PROFIBUS DP

WAGO 750-333 Fieldbus Coupler maps the peripheral data of all the WAGO I/O System’s I/O modules on PROFIBUS DP. When initializing, the coupler determines the node’s module structure and creates the process image of all inputs and outputs. Modules with a bit width smaller than eight are grouped in one byte for address space optimization. It is furthermore possible to deactivate I/O modules and to modify the image of the node according to the connected signals without having to modify the existing control application. The diagnostic concept is based on ID- and channel-related diagnostics according to EN 50170. This does away with the need for programming modules to evaluate manufacturer-specific diagnostic data.

Brand: WAGO
Categories: Automation Technology
Model: WAGO 750-333

WAGO 750-333 Fieldbus Coupler PROFIBUS DP; 2nd Generation; 12 MBd
Communication: PROFIBUS
Number of fieldbus nodes on master (max.): 96
Number of I/O points: 6,000
Baud rate: 9.6 kBd … 12 MBd
Bus segment length (max.): 1200 m
Transmission medium: Cu cable per EN 50170
Transmission time: typ. 1 ms (10 couplers; each 32 digital I/O and 12 Mbaud) max. 3.3 ms
Number of modules per node (max.): 63
Input and output process image (fieldbus) max.: 244 bytes/244 bytes
Supply voltage (system): 24 VDC (-25 … +30 %); via pluggable connector (CAGE CLAMP® connection)
Width: 50.5 mm / 1.988 inches
Height: 100 mm / 3.937 inches
Depth: 71.1 mm / 2.799 inches
Depth from upper-edge of DIN-rail: 63.9 mm / 2.516 inches