WAGO 750-514 2-channel relay output module

WAGO 750-514 2-channel relay output module. This digital output module transmits control signals from the automation device to the connected actuators. The internal system voltage triggers the relay. The NO contacts are electrically isolated. The state of the relay is indicated by a LED.

Brand: WAGO
Categories: Automation Technology
Model: WAGO 750-514

WAGO 750-514 2-channel relay output module
Number of digital outputs: 2
Total number of channels (module): 2
Signal type: Digital
Actuator connection: 2 x (1-wire)
Output circuit design: 2 changeover contacts Relay
Output characteristic: potential-free
Switching frequency (max.): 0.33 Hz
Switching voltage (max.): 125 VAC, 30 VDC
Switching current (max.): 0.5A
Switching current (note): 0.5 A at 125 VAC; 1 A at 30 VDC
Switching voltage (min.): 0.01V
Switching current (min.): 0.01mA
Switching power: 62.5 VA / 30 W
Pull-in time (max.): 4ms
Drop-out time (max.): 4ms
Width: 12 mm / 0.472 inches
Height: 100 mm / 3.937 inches
Depth: 69.8 mm / 2.748 inches
Depth from upper-edge of DIN-rail: 62.6 mm / 2.465 inches