ABB AO810V2 3BSE038415R1 Analog Output Module 1*8 channels. 0(4)..20mA, 14bit RLmax 500/850 Ohms. Use module Termination Unit TU810, TU812, TU814, TU830 or TU833. The AO810V2 Analog Output Module has 8 unipolar analog output channels. To supervise the communication to the D/A-converters the serial data is read back and verified. The opencircuit diagnostic is received during the readback. The module performs self-diagnostic cyclically. The module diagnostics includes process power supply supervision, which is reported when supply voltage to output circuitry is to low. The error is reported as a channel error. The channel diagnostic includes fault detection of the channel (only reported on active channels). The error is reported if the output current is less than the output set value and the output set value is greater than 1 mA.
ABB S800 I/O is a comprehensive, distributed and modular process I/O system that communicates with parent controllers and PLCs over industry-standard fieldbus technology and therefore can be used with a wide range of process controllers from ABB and other vendors.
ABB AO810V2 Analog Output Module Features and benefits
8 channels of 0…20 mA, 4…20 mA outputs
OSP sets outputs to predetermined state upon error detection
Analog Output is to be short circuit secured to ZP or +24 V
Type: Analog Output
Signal specification: 0..20 mA, 4..20 mA
Article number: 3BSE038415R1
Number of channels: 8
Use with MTU: TU810, TU812, TU814, TU830, TU833